WD1611
1.Allow only one-way rotation either
clockwise or counterclockwise, and
the direction is set during fabrication.
2.The rotation interval is 120 degree.
3.Machanical key switch is used to
lock/unclock rotation direction.
4.Electronic control board can connect
any access control device with dry
contact interface.
5.Power supply: AC220V, 50HZ
6.Operation environment:
-15℃-+60℃，RH：less than 95％
7.Dimensions are 2185mm high,
1525mm wide and 1270mm deep.
8.Two type material finished:
a. WD1611-P, all steel components
are hot-dipped galvanized and all
surfaces are powder coated to grey
white color.
b. WD1611-S, all steel componets are
stainless steel.
|
