Designed to determine the indentation hardness of materials ranging from cellular products to rigid plastics. Each Durometer type is made to a specific scale (i.e. A, C, D) and is capable of producing a value between 0 and 100. Shore A is designed to measure the penetration hardness of rubber, elastomers and other rubber like substances such as neoprene, silicone, and vinyl. It can also be used for soft plastics, felt, leather and similar materials. Shore C is designed for various foam and sponge. Shore D is designed for Plastics, Formica, Epoxies and Plexiglass.

* It meets standards: DIN 53505, ISO 868,  ISO 7619, ASTM D 2240, JIS K7215.

    * Used the exclusive Micro-computer LSI circuit and crystal time base to offer high accuracy measurement.

       * Digital  display  gives  exact reading with  no guessing or errors.

   * Can communicate with PC for recording, printing and analysing by the optional software and cable for RS232C interface.

        * Automatic power off to conserve power.

        * Use operation stand  of optional parts  can

           get good  accuracy and repetitiveness due to constant measurement force to eliminate the errors caused by artificially applied different force.

HT-6510A, HT-6510C , HT-6510D.

Model:

Shore Hardness Tester  HT6510A HT6510D

Product info: digital durometer for shore hardness testing pocket size model with integrated probe

Test scale: shore hardness

Standards: DIN53505, ASTMD2240, ISO7619, JISK7215

Parameters displayed: hardness result, average value, max. value

Measurement range:0-100HA(HD)

Measurement deviation:＜1%H

Resolution: 0.1

Auto switch off

With RS232C interface

Operating conditions: 0℃ to 40℃

Power supply: 4x1.5V AAA (UM-4) battery

Battery indicator: low battery indicator

Dimensions: 162x65x38mm

Weight (not including probe):173g