The loom is suitable chiefly to weave natural fiber (cotton, wool, flax), chemical fiber and blended fiber, particularly suitable for weaving heavy fabric. It is capable of weaving small jacquard fabrics; the machine can accommodate a harness frame of 20 shafts.

RAPIER LOOM MODELGA738-II SPECIFICATION

Nominal reed width: 2000-2200mm

Speed: Max operating speed 320 pick/min,max insertion rate 600m/min

Weft yarn count range: Cotton-5Ne-80Ne

                   Wool-8Nm-130Nm

                   Man-made fibers-1200dtex-75tex

Fabric weight: From 70 to 600g/sqm

Power: Main motor 3kw-6pole

Shedding: Lower positive mechanical dobby max.20 shafts, pitch 12 or mechanical jacquard.

Beat-up: Four-bar linkage with short connecting rod

Let-off: Mechanical positive and continuous warp let off, pick density from 4 to 73 picks/cm.

Take-up: Mechanical positive and continuous warp cloth take-up. pick density from 4-73 picks/cm，the max winding diameter Full rolling diameter is 500mm

Warp stop: Electrical warp stop device with 6 bars

Weft stop: Piezo-electronic weft monitor with high sensitivity

Weft selection: Electronic weft selection which is available in single or mixed or multicolor up to 6 colors.

Weft feed: The loom is possible to be equipped with different types of weft accumulators.

Selvedges: Leno selvedges are driven by the 1st and 2nd of heald frame

Electrical control: The most advance electrical control system, microprocessor units guarantees all the machine functions, supervising operation, collecting and storage and display of productivity data.

Lubrication: The whole needful lubricating point is concentrative lubricated by means of a manual pump.